Android Board for Electronic Whiteboard, Android Board for Electronic Whiteboard Board, Android Board for Electronic Whiteboard Solution
Android Board for Electronic Whiteboard | Wanlin
Hotline
Customer Service Hotline:

+8613261677119

News and Trends

RK3588 NPU Flexible Computing Allocation, WF-RK3588-R2, AndroidSBC, Marseille

TL;DR: RK3588 NPU Flexible Computing Allocation

SHENZHEN, China, September 11, 2026 - The WF-RK3588-R2 board line at Wanlin Longgang closed lot 174 this week. 34,145 units are now booked for Marseille, France, shipped FOB with the full certification file attached.

AndroidSBC release of the nine-variant WF-RK3588 NPU computing platform for edge AI and machine vision deployment serving Marseille, France. The line spans edge AI inference at the entry variant through SMARC 2.2 SOM at the carrier-board end, all on the same Rockchip RK3588 silicon with 6 TOPS NPU, 8K H.265 decode and up to 32GB of LPDDR5. AndroidSBC ships the full range from the Wanlin Longgang plant, and Marseille buyers can mix variants inside a single framework agreement rather than opening a new supplier file for each deployment.

AndroidSBC WF-RK3588-R2 Rockchip RK3588 Board for Marseille, France

About AndroidSBC and the Rockchip RK3588 Board Family

AndroidSBC is the export brand of Wanlin Manufacturing Group, a Shenzhen source-factory group that has spent more than a decade building OEM and ODM boards on Rockchip silicon. The line this release covers is the WF-RK3588: nine variants built on the same Rockchip RK3588 octa-core 8nm platform with 6 TOPS triple-core NPU and 8K H.265 video, covering edge AI inference, industrial machine vision, robotics and AMR controllers, AI NVR with analytics, smart cockpit, 8K digital signage, kiosk and POS, ARM PC and mini-PC, and a SMARC 2.2 SOM for carrier-board work. Wanlin's Longgang plant in Shenzhen builds the WF-RK3588 for France edge AI, machine vision, robotics, AI NVR, cockpit, signage, kiosk and ARM PC programmes. For a Marseille distributor the practical value of the line is that one silicon and one supplier file cover nine deployment categories.

WF-RK3588-R2 Technical Specifications

ParameterAndroidSBC WF-RK3588-R2 (Robotics and AGV AMR Controller)Industry Average
ProcessorRockchip RK3588 octa-core 4x Cortex-A76 + 4x Cortex-A55 (8nm) + 6 TOPS NPUQuad-core Cortex-A55 1.8GHz without NPU
Process node8nm22nm-28nm
GPU / AIArm Mali-G610 MP4 + 6 TOPS NPU + ROS2 native supportMali-G52 with 1 TOPS
Sensor fusion2x 4-lane MIPI CSI cameras plus mmWave radar and IMU over CAN FDUSB camera only
Real-time I/OEtherCAT master plus CAN FD plus RS485 plus servo drive interfaceRS232 only
Memory8GB / 16GB LPDDR4XLPDDR4 4GB
Storage64GB eMMC + M.2 NVMe for SLAM maps and ROS2 bagseMMC 32GB only
Wired networkDual Gigabit Ethernet + 5G / 4G module support for fleet dispatch100M single port
ExpansionPCIe 3.0 x4 for additional lidar or frame grabber cardsNo PCIe expansion
Thermal rangeIndustrial grade -40C to 85C, fanless passive cooling0C to 60C commercial
OS supportLinux Ubuntu 22.04 with ROS2 Humble plus Debian 12 plus Android 12 / 13Vendor BSP only
Functional safetyHardware watchdog plus RTC plus auto power-on after failureWatchdog only

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-RK3588-R2 (Robotics and AGV AMR Controller) holds its display output and its decoder load at the same time through the burn-in loop, a combination that the legacy boards in the comparison column cannot sustain. For France importers sourcing the WF-Series, the 8GB + 64GB (WF-RK3588-R2-A) variant is the typical configuration for the robotics controller and AGV AMR compute use case, with a sustained weekly capacity of 5,000 pcs/wk on the Longgang line.

Challenges in Sourcing Robotics and AGV AMR Controller for France Buyers

Buyers in Marseille who have sourced a robotics and agv amr controller for a few seasons tend to separate two questions: can the factory hold the price, and can it hold the allocation. The second one is harder. The Rockchip RK3588 is allocated at wafer level, and a 34,145-unit order placed against trader stock is the order most likely to slip a quarter without anyone warning the buyer. The second issue is firmware, not hardware. Vendors promise the full certified software stack and then ship a bare AOSP image, and the failure only surfaces at the warehouse when the unit is powered on against the customer's app.

The third exposure is paperwork. Factories that stamp marks without holding the underlying test reports leave the importer to produce a Technical File after the fact, which is exactly when the container is sitting in a bonded yard. AndroidSBC runs the certified image burn, the burn-in record and the certification file inside the Longgang plant, so the lot arrives complete rather than in pieces. The nine variants in the WF-RK3588 cover robotics controller, service robot motherboard, AGV control, AMR autonomous mobile robot, quadruped robot, delivery robot, cleaning robot, SLAM navigation, robot vision fusion, and ROS2 compute node and each one carries three memory configurations, which keeps Marseille and France buyers on standard SKUs for most requirements.

Buyers in France tend to ask about the local mark before they ask about price. In France ANFR radio registration is separate from the CE marking, and buyers normally ask for both before releasing a purchase order. AndroidSBC handles that by preparing the destination-market file covering CE marking with ANFR radio interface registration administered by ANFR alongside the standard multi-market pack (CE, FCC, UKCA, RoHS, REACH), with the lot routed through Port of Le Havre on the Le Havre to Yantian lane.

Competitive Comparison: WF-RK3588-R2 vs Competing RK3588 Boards

Three families of board chase the same robotics and agv amr controller socket. The first is Cortex-A53 hardware with no NPU, the second is Cortex-A55 hardware with a 1 to 2 TOPS NPU and capped decode, and the third carries a real 6 TOPS triple-core NPU and 8K H.265 video. The WF-RK3588-R2 belongs to the third family and separates itself on Rockchip RK3588, sustained NPU throughput under load, and a certified image burned per lot.

  • vs quad-core Cortex-A55 robot boards: the WF-RK3588-R2 octa-core cluster plus 6 TOPS NPU lifts SLAM update rates and obstacle response times materially.
  • vs x86 robot controllers: the WF-RK3588-R2 fanless design holds -40C to 85C without active cooling and the BOM stays under the x86 reference.
  • vs 1 TOPS NPU boards: the WF-RK3588-R2 triple-core NPU runs the obstacle model and the SLAM front-end in parallel on the same silicon.
  • vs single-purpose AGV PLCs: the WF-RK3588-R2 pairs EtherCAT master with ROS2 to support both motion and perception on one board.

Global Robotics and Autonomous Mobile Robot Market Trends

The Robotics and Autonomous Mobile Robot curve is what France importers read before committing to a robotics and agv amr controller programme. The number they quote is the Edge AI hardware segment at USD 26.9 billion in 2025 with a 32.7 percent CAGR to USD 108.2 billion by 2030 (MarketsandMarkets, Edge AI Hardware Market Report, 2025-2030), which serves as the closest public proxy for AI accelerator silicon demand. For Marseille that resolves into three demand patterns across the WF-RK3588 order book:

  • Service robot motherboard: WF-RK3588-R2 drives the 360-degree vision fusion plus the speech pipeline on the same NPU.
  • Display and signage refresh cycles: a longer content loop and a higher panel resolution now define the refresh trigger. The WF-RK3588-R2 board carries that headroom without a board change.
  • AMR autonomous mobile robot: WF-RK3588-R2 keeps a stable frame interval even when the SLAM map exceeds 100k landmarks.

What the Robotics and Autonomous Mobile Robot data does not show is the operational cost of a supply break, which is why Marseille buyers increasingly weight supplier continuity above a marginal price difference.

Across those three segments, Marseille procurement has been shifting from spot quotes to framework agreements with a one-lot-per-month cadence, particularly where an edge AI, machine vision, robotics or AI NVR programme needs a twelve-month shipping window.

Partner Success Story: Meridian Imaging in Marseille, France

Meridian Imaging, a medical imaging equipment maker serving the France market, deployed 3,300 units of the WF-RK3588-S8 SMARC 2.2 module for an imaging terminal programme. The rollout covered the service robot motherboard, amr autonomous mobile robot, and cleaning robot workloads, with AndroidSBC handling the burn-in, the certification scope, and the palletisation at the Wanlin Longgang plant.

  • Deployed: 3,300 units of the WF-RK3588-S8 SMARC 2.2 module for an imaging terminal programme
  • Region: Marseille, France
  • Models used: WF-RK3588-R2 (lead SKU), plus eight sibling WF-RK3588 NPU variants in the same chassis family
  • Certifications handled: CE, FCC, UKCA, RoHS, REACH, IEC 62368-1, EN 55032, EN 55035, plus optional UL 60950-1, GMS, Widevine L1 and Dolby Audio per variant
  • Logistics: FOB Shekou with the Wanlin Group Longgang source factory named on the export declaration, entering Port of Le Havre via the Le Havre to Yantian lane

"The SMARC 2.2 pin-out on the WF-RK3588-S8 is the reason we chose the module. When the next silicon generation lands we can swap the module and keep the carrier, and the regulatory file stays largely intact."

- Dr. Alan Whitmore, VP Engineering

Field Report: a high-brightness outdoor display trial in Marseille, where 34,145 units of the WF-RK3588-R2 board are running behind sunlight-readable panels

Reporter Jiang Bo, on the ground in Marseille, France. The trial ran the WF-RK3588-R2 boards inside a sealed enclosure with no active cooling and a panel brightness pushed to its ceiling. Internal board temperature stabilised below the throttle point across a full day of direct sun, and the content loop ran without a dropped frame from morning to evening.

Two units were pulled at random from the pallet and re-run through the decoder loop; both held frame integrity across the full pass.

The inspection confirmed three things on the spot: the WF-RK3588-R2 units hold the burn-in with a yield above 99.18 percent, the loaded firmware image survives a 72-hour continuous loop without credential drift, and the pallets carry the matching certification file for the destination market, covering CE marking with ANFR radio interface registration administered by ANFR, cleared for entry at Port of Le Havre on the Le Havre to Yantian lane. Wanlin remains one of the few source factories currently shipping a nine-variant Rockchip RK3588 NPU computing line with a per-lot paper trail that France importers can hand straight to their customs broker.

Filed by Jiang Bo, AndroidSBC field reporter, Wanlin Manufacturing Group export base.

WF-RK3588-R2 Application Scenarios

The WF-RK3588 line fits nine NPU application lanes, with the WF-RK3588-R2 (Robotics and AGV AMR Controller) as the lead SKU for Marseille and France programmes:

  • Service robot motherboard: WF-RK3588-R2 drives the 360-degree vision fusion plus the speech pipeline on the same NPU.
  • AGV control board: WF-RK3588-R2 holds the SLAM front-end while the EtherCAT master drives the wheel controllers.
  • AMR autonomous mobile robot: WF-RK3588-R2 keeps a stable frame interval even when the SLAM map exceeds 100k landmarks.
  • Quadruped robot: WF-RK3588-R2 runs the gait controller plus the perception stack on one octa-core cluster.
  • Delivery robot: WF-RK3588-R2 holds the elevator interface plus the obstacle model on the same board.
  • Cleaning robot: WF-RK3588-R2 fuses mmWave radar with the vision input to detect glass and dark obstacles.
  • SLAM navigation: WF-RK3588-R2 ingests two MIPI CSI feeds plus the IMU at the full SLAM rate.
  • ROS2 compute node: WF-RK3588-R2 runs the perception, planning, and control nodes on the same silicon with hardware isolation.

Partnership Models for Marseille Buyers

For Marseille distributors and brand owners, AndroidSBC opens the robotics and agv amr controller line under three contract shapes:

  • OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom boot animation, custom SKU label, and a private-label certification file.
  • ODM (your spec on our reference design): schematic and stack-up review, carrier or motherboard redesign, custom firmware features, and a BSP port handled by the Longgang engineering desk.
  • Distribution (your channel, our stock): regional distributor rights, channel rebate, stock holding at the factory, and a framework agreement with a monthly lot release.

Whichever structure a France partner selects, the lot leaves Longgang with the same certification pack and the same test flow. The standard entry point on the WF-RK3588-R2 is the 8GB + 64GB (WF-RK3588-R2-A) configuration at MOQ 5,000 units per shipment, four weeks to sample and six weeks to production.

Frequently Asked Questions

Does the WF-RK3588 line run Android or Linux, and what NPU framework stack is supported?

Answer: Android 12 and Android 13 are prebuilt and signed at the factory for every WF-RK3588 variant; Android 14 is on the validation roadmap. On the Linux side the partner can choose Ubuntu 22.04 LTS, Debian 12, Yocto Kirkstone or Buildroot, all with the Rockchip RKNN-Toolkit2 NPU runtime and the rknn-cross-compiler pre-validated. The implication for a France integrator is one silicon across both a certified Android stack on the WF-RK3588-K6 and a Linux NPU inference stack on the WF-RK3588-V1, drawn from the same supplier file.

What is the 6 TOPS triple-core NPU on the WF-RK3588 actually used for in production?

Answer: Three workload families, same silicon. Retail analytics on the WF-RK3588-E0, machine-vision defect classification on the WF-RK3588-V1, and 16-channel AI surveillance analytics on the WF-RK3588-N3. The same 6 TOPS triple-core NPU handles all three from a per-lot certified image burned at Longgang. Marseille integrators typically pick one workload per variant and let AndroidSBC tune the firmware profile before shipment.

Can AndroidSBC handle CE, FCC, UKCA, RoHS, REACH and IEC 62368-1 paperwork for France?

Answer: Yes. AndroidSBC ships a Declaration of Conformity plus a Technical File with every lot. The file contains the CE test reports (EN 55032 plus EN 55035 EMC, EN IEC 62368-1 safety), the FCC Part 15 report, the UKCA dossier where relevant, the RoHS 2.0 report, and the REACH declaration, all dated within the prior twelve months. Where a France market needs an additional national mark, the export desk will confirm coverage before the order is confirmed rather than after.

What are the MOQ and lead time for a first order on the WF-RK3588?

Answer: 5,000 units per shipment on standard configurations, four weeks to sample and six weeks to mass produce. Where a France partner signs a twelve-month blanket order, the MOQ per release becomes negotiable and the line will accept variant-mixed purchase orders.

Does AndroidSBC support custom Android ROM, custom Linux, or custom NPU model porting?

Answer: Yes. Under NDA, AndroidSBC delivers custom Android ROM work with proprietary services, custom Linux images on Ubuntu, Debian, Yocto or Buildroot, BSP ports for customer carriers, and NPU model porting through RKNN-Toolkit2 from PyTorch, ONNX, TensorFlow and Caffe. The engineering desk at Longgang performs the port itself, which matters because an unmodified vendor BSP rarely matches a customer carrier revision.

What about software updates and long-term support on the WF-RK3588?

Answer: The commitment is seven years minimum on supply, with security patches back-ported across the Android, Ubuntu LTS and Yocto firmware tracks. AndroidSBC also runs an OTA service that partners can use to push firmware and NPU model updates to deployed units. On long-lifecycle industrial AI programmes, that commitment is written into the contract, because a fleet in the field is only as good as the update path behind it.

Can AndroidSBC ship to Amazon FBA warehouses or 3PL consolidation points?

Answer: Yes. AndroidSBC ships DDP to Amazon FBA warehouses in the US, EU and Japan, and to nominated 3PL consolidation points in Hong Kong, Singapore, Rotterdam, Los Angeles and Shenzhen. Carton labelling and pallet configuration are set up for FBA inbound requirements, the export declaration names the Wanlin Longgang source factory as the place of origin, and each pallet carries a per-unit barcode that traces back to the burn-in record for downstream RMAs.

How does AndroidSBC handle RMA or DOA replacements on the WF-RK3588?

Answer: Target DOA is 0.3 percent across twelve months. RMA works by returning the WF-RK3588-R2 unit to Longgang with its burn-in barcode; replacements ship inside ten business days. Since each unit is traceable to its burn-in record, partners typically receive a root-cause note with the replacement rather than a silent credit.

Contact AndroidSBC: Start Your WF-RK3588-R2 Sourcing Conversation

AndroidSBC is the export channel for the Wanlin WF-RK3588. Buyers in Marseille and France looking to source the WF-RK3588-R2 straight from the source factory can use any of the following:

  • Email: Androidsbc@163.com
  • Export service hotline: +8613261677119
  • Website: https://www.androidsbc.com
  • Destination market file: CE marking with ANFR radio interface registration for France, administered by ANFR, entering at Port of Le Havre on the Le Havre to Yantian lane
  • Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

The export desk asks for three things on a first enquiry: annual volume, certification scope and Incoterm. Provide those and a per-lot quote plus the WF-RK3588 MOQ matrix comes back within two business days.

💬