Payment Terminal with HDMI, WF-SPT-03, AndroidSBC, Marseille

TL;DR: Payment Terminal with HDMI

AndroidSBC manufacturer capacity statement from the smart payment terminal production base serving Marseille, France. The WF-SPT-03 smart payment terminal Android motherboard covers the 4G unattended payment terminal build for vending and lockers and eleven sister configurations in the WF-SPT series, spanning the RK3568 quad-core ARM Cortex-A55 2.0GHz SoC with the ARM Mali-G52 2EE GPU, 5.5-inch 720x1280 MIPI DSI capacitive touch panel, and Android 13 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Marseille and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

The smart payment terminal Android motherboard family from AndroidSBC is specified for the way France acquiring actually works - contactless first, QR close behind, receipt on paper, firmware signed, estate managed remotely. Marseille buyers get that as a standard baseline rather than as a paid engineering change. Peripheral validation is treated as part of the product, not as an afterthought: the printer header pinout, the reader antenna keep-out and the scan engine UART mapping are fixed at the design stage and held for the life of the configuration in France.

WF-SPT-03 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-03 (4G unattended payment terminal build for vending and lockers) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-03-A variant is the typical configuration for the vending machines, parcel lockers and unattended kiosks use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

Attended and unattended payment hardware share a board but not a duty cycle. The Marseille buyer who specifies a single configuration for both usually ends up over-specifying the counter and under-specifying the kiosk.

Key handling is the fifth problem. Payment hardware shipped into France has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the Marseille delivery file. What Marseille integrators get is a board that repeats: 166800 units now, 166800 more next quarter, the same connector map, the same printer pinout, the same Android baseline, all moving on the Marseille - Shanghai lane into France.

Competitive Comparison: WF-SPT-03 vs Competing Smart Payment Terminal Motherboards

Competing boards in this class usually quote a chip and a price. AndroidSBC quotes a configuration: the printer profile, the reader antenna specification, the modem band list, the firmware window and the compliance set for France.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Marseille buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Marseille is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

The 4G unattended payment terminal build for vending and lockers sits in the middle of a market that is growing on formats rather than on unit replacement. Every new unattended format in France is a new terminal, and every new terminal is a board decision for Marseille buyers.

• Countertop tier: WF-SPT-02 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-09 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

Market growth in France does not automatically translate into margin for the integrator. The programmes that pay are the ones where the board arrives qualified, documented and repeatable, which is the gap AndroidSBC is built to close for Marseille.

Partner Success Story: Gulf Payments Ventures (hotel and restaurant payment integrator)

The GCC hospitality payments team at Gulf Payments Ventures wrote the specification themselves: one Android baseline, one printer pinout, one compliance file for Marseille. Gulf Payments Ventures installed 166800 WF-SPT boards across 52 hotel and restaurant sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Payments Ventures branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Gulf Payments Ventures Payments Lead for GCC Hospitality puts it plainly: "Gulf Payments Ventures runs Arabic and English receipts from the same smart payment terminal board, and 166800 units were accepted into the Marseille hospitality group after a single qualification run."

Field Report: unattended payment rollout with a vending machine operator

NANSHAN, September 30, 2026 - Gong Li, AndroidSBC field desk. The WF-SPT-03 configuration was built for the 4G unattended payment terminal build for vending and lockers use case, and the France team ran the acceptance test with the same printer mechanism and reader antenna the integrator will install. The WF-SPT-03 payment terminal board order for Marseille, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-SPT-03 4G unattended payment terminal build for vending and lockers production lot includes the WF-SPT-03-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Gong Li, AndroidSBC field desk, NANSHAN. French retail groups specify the receipt layout early, because the printer control header has to match the fiscal wording used at the till.

WF-SPT-03 Application Scenarios

The WF-SPT-03 4G unattended payment terminal build for vending and lockers sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-03-A configuration is the typical build for the vending machines, parcel lockers and unattended kiosks use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-01 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-05 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Marseille Buyers

The Marseille decision is usually commercial rather than technical - whether the partner wants inventory risk, integration depth or brand ownership in France.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

The France partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.

Frequently Asked Questions

Does the smart payment terminal board family support a 4G unattended payment terminal build for vending and lockers?

Answer: Yes. The 4G unattended payment terminal build for vending and lockers is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in Marseille.

Which configurations are available in the WF-SPT family for France buyers?

Answer: AndroidSBC ships twelve configurations including the RK3568 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in France.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC prepares CE marking with ANFR radio interface registration documentation and ANFR conformity files alongside the production order, so the Marseille acquiring partner receives a file that names the parts on the pallet.

What is the minimum order quantity and the sample lead time for France?

Answer: For Marseille programmes the practical answer is a sample lot first, a joint qualification run second, and a production slot third, with the compliance file issued at the sample stage.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the Marseille estate.

How are firmware updates delivered to a France device estate after deployment?

Answer: Updates are signed, staged and reversible. The Marseille integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.

What shipping terms does AndroidSBC support for France orders?

Answer: Terms are agreed per programme: FOB Shenzhen for stock configurations, CIF Port of Marseille for volume lots, and DAP where the Marseille partner wants delivery to its own warehouse.

Contact AndroidSBC: Start Your WF-SPT-03 Sourcing Conversation

For Marseille buyers the fastest route is a sample lot: specify the format, order the board, qualify it on the bench, then move to a production slot with the compliance file already prepared.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Marseille and France buyers the offer is a source-factory relationship: twelve configurations, one peripheral contract, a frozen bill of materials and a compliance file that ships with the pallet rather than after it.