Government Self-Service Board for Korea, WF-S3399, AndroidSBC, Marseille

TL;DR: Government Self-Service Board for Korea

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-S government service board family serving Marseille, France. The WF-S3399 government service kiosk Android motherboard spans the dual-screen high definition service terminal and eleven sister models in the WF-S series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-S family from the Longgang source factory in Shenzhen to Marseille and France importers who run citizen service hall, tax and social security counter, certificate printing, identity verification, public information display and outdoor smart city programmes.

About AndroidSBC and the Government Service Kiosk Android Motherboard Family

The WF-S family exists because public sector procurement rarely buys one board. A citizen service hall needs an enquiry screen, a payment point, a certificate printer and an identity verification terminal, and those four jobs do not want the same silicon. AndroidSBC puts eight Rockchip and Allwinner platforms under one Android baseline so a Marseille integrator can mix tiers inside one France tender. For France importers the working rhythm in Marseille is a sample lot in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-S3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-S3399 (dual-screen high definition service terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-S family, the WF-S3399-A variant is the typical configuration for the high resolution citizen information terminal use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Government Service Kiosk Android Motherboards for France Buyers

The practical failure mode in France estates is the unattended restart. A terminal that needs a staff member to walk over and power it after an outage has not solved the problem the kiosk was bought to solve.

For identity work AndroidSBC wires the trust chain at board level: secure boot, a trusted execution environment, hardware-backed key storage and an audit log that survives a power cycle, which is what a France acceptance test asks to see. AndroidSBC has now closed the 4th consecutive quarterly window on this family, with 168400 boards scheduled for Marseille and France on the Marseille - Shanghai lane as of September 20, 2026.

Competitive Comparison: WF-S3399 vs Competing Government Service Kiosk Android Boards

The WF-S family is specified against the alternatives a Marseille integrator actually shortlists: a single-platform board vendor, a board shipped without drivers, a board without unattended-operation features, and a board that cannot drive two panels independently.

• vs single-platform board vendors: the WF-S family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-S family arrives with capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay drivers already integrated, so the {city} integrator writes the citizen service application rather than the driver layer.
• vs boards without unattended-operation features: the WF-S family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-S family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a citizen screen plus an operator screen and a mirrored duplicate.

Global Government Self-Service / Citizen Service / Public Information Terminal Market Trends

AndroidSBC reads the public-sector figures as a demand baseline, not a forecast: dual-screen high definition service terminal programmes in France convert into board orders at a rate set by hall count and terminal density, and both are visible in Marseille tender calendars well before the order lands.

• Citizen service halls and municipal counters: WF-S3399 is the usual starting point for hall rollouts, with the dual-screen WF-S1331 as the citizen plus operator option.
• Tax, social security and housing fund terminals: the mid-tier WF-S1331 and the printing-capable WF-S6180 sister SKUs form the counter ladder, with certificate printing and queue management.
• Outdoor and 24-hour unattended cabinets: WF-S6180 and the industrial sister SKUs cover continuous-operation municipal self-service points across a city estate.

The gap between a market forecast and a Marseille order book is the terminal count per hall type, and AndroidSBC publishes the per-hall assumptions it uses for France so integrators can sanity-check their own numbers.

Partner Success Story: Meridian Civic Systems (municipal citizen service integrator)

The Meridian Civic Systems case in the EMEA public administration segment is a working example of how the WF-S family from AndroidSBC supports Marseille integrators. Meridian Civic Systems rolled out 168400 WF-S government service boards across 41 municipal halls, replacing queued counter interviews with self-service enquiry and certificate points.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Civic Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, ID card reader, fingerprint module, face recognition camera, QR code, NFC, barcode scanner, thermal printer, document scanner and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown, secure boot and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Meridian Civic Systems Head of Citizen Service Platforms for EMEA Public Administration noted: Meridian Civic Systems standardised on the WF-S dual-screen board so the citizen screen and the operator screen run independent content from one board, with 168400 units released to the Marseille administration in the first wave.

Field Report: dual-screen information terminal rollout at a public security service hall

PINGHU, Shenzhen, September 20, 2026 - Cao Min, AndroidSBC field desk. Technicians at the Longgang line re-ran the ID card reader and thermal printer handshakes on every WF-S3399 board in the lot, because those two peripherals are where a France rollout tends to stall. The WF-S3399 government service kiosk Android motherboard order for Marseille, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-S3399 dual-screen high definition service terminal production lot includes the WF-S3399-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Cao Min, AndroidSBC field desk, PINGHU, Shenzhen. CE plus ANFR; government service boards commonly pass through Le Havre for prefecture and municipal rollouts.

WF-S3399 Application Scenarios

The WF-S3399 dual-screen high definition service terminal sits inside a twelve-variant WF-S government service kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-S3399-A configuration is the typical build for the high resolution citizen information terminal use case, with identity peripheral driver SDK and staged OTA management bundled.

• Citizen service hall enquiry and queue points: WF-S3399 plus WF-S5270 form the hall entry ladder, with independent dual display output and 4K HDMI.
• Tax, social security and housing fund counters: WF-S5270 plus WF-S8800 are the usual pairing where certificate printing and ID verification run on the same board.
• Immigration and public security checkpoints: WF-S8800 is the dedicated secure identity SKU, with secure boot, trusted execution and an audit trail that survives a power cycle.
• AI identity verification and face recognition terminals: WF-S8801 plus WF-S3600 cover the vision and verification workload on the device.
• Community and neighbourhood service desks: the compact WF-S3399 and the entry-tier sister SKUs serve walk-in enquiry where counter space is limited.
• Outdoor and semi-outdoor municipal cabinets: the industrial T527 sister SKU takes the 24-hour unattended points that see a full seasonal temperature range in Marseille.
• Hall notice and announcement networks: the H618 and A133 sister SKUs drive continuous-play public information screens across a Marseille building estate.
• Document scanning and form filling terminals: WF-S3600 plus WF-S5270 pair the scanner and the signature pad on one board for the Marseille administration.
• Legacy estate refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Marseille hall terminals, so a refresh does not become a redesign.

Partnership Models for Marseille Buyers

For Marseille and France partners the commercial question is how much of the design they want to own, and AndroidSBC answers it with three tracks on one WF-S platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Marseille, which is common when a distributor wins a tender that turns into a private-label line for France.

Frequently Asked Questions

Does the WF-S government service kiosk Android motherboard family support a dual-screen high definition service terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The dual-screen high definition service terminal runs on the WF-S baseline image that France buyers receive, so there is no separate integration project.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-S family?

Answer: In practice the RK3399 sets three things: how many panels the board can drive independently, whether on-device inference is available for face recognition, and how much thermal headroom the cabinet needs. Everything else in the WF-S family is common across tiers for Marseille and France.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?

Answer: Yes. The export desk prepares CE marking with ANFR radio interface registration documentation alongside the ANFR conformity file, and both are versioned against the board revision that ships to Marseille and France.

What are the MOQ and lead time for a first order of the WF-S government service kiosk Android motherboard family?

Answer: For France programmes the entry points are one board as a sample, 100 boards for OEM branding and 500 boards for an ODM design. Mass production lead to Marseille is 15-30 days from BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-S family?

Answer: Yes. AndroidSBC writes and maintains custom firmware for France public sector deployments, from kiosk-mode lockdown and pre-installed applications through to a full AOSP build or a Linux BSP port.

How are software updates and long-term support handled on the WF-S family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-S family, delivered as staged OTA with rollback. France estates can hold a revision while the Marseille integrator validates it.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-S family?

Answer: Yes. AndroidSBC supports FBA and 3PL consolidation delivery for the WF-S family, with the Port of Marseille routing and the export documentation handled by the export desk.

How are RMA and DOA replacements handled on the WF-S government service kiosk Android motherboard family?

Answer: DOA boards are replaced on the next shipment and RMA units are repaired or replaced against the board revision record, which AndroidSBC keeps versioned for every Marseille and France lot.

Contact AndroidSBC: Start Your WF-S3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-S government service kiosk Android motherboard family. Marseille integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Marseille and France the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.