Queue Management Board for Korea, WF-Q3399, AndroidSBC, Marseille

TL;DR: Queue Management Board for Korea

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-Q queue management board family serving Marseille, France. The WF-Q3399 queue management kiosk Android motherboard spans the dual-screen high definition queue display terminal and eleven sister models in the WF-Q series, all built on the RK3399 dual Cortex-A72 1.8GHz plus quad Cortex-A53 SoC with the ARM Mali-T860 MP4 GPU, dual 4K output, HDMI plus eDP, and Android 11 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-Q family from the Longgang source factory in Shenzhen to Marseille and France importers who run hospital outpatient counters, bank branch ticketing, clinic calling panels, tax and social security windows, restaurant waiting lists and outdoor ticketing cabinets.

About AndroidSBC and the Queue Management Kiosk Android Motherboard Family

The WF-Q family exists because a queue system is never one terminal. A hospital wants a ticket dispenser at the entrance, a calling panel at every consultation room and a status screen over the waiting area, and those three jobs do not want the same silicon. AndroidSBC puts eight Rockchip and Allwinner platforms under one Android baseline so a Marseille integrator can mix tiers inside one France rollout. For France importers the working rhythm in Marseille is a sample board in 1-3 days, an OEM pilot from 100 pieces and a 15-30 day mass-production window once the BOM is signed off.

WF-Q3399 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-Q3399 (dual-screen high definition queue display terminal) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-Q family, the WF-Q3399-A variant is the typical configuration for the high resolution window display network use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Queue Management Kiosk Android Motherboards for France Buyers

The practical failure mode in France estates is the unattended restart. A ticket dispenser that needs a staff member to walk over and power it after an outage has not solved the problem the queue system was bought to solve.

On display topology AndroidSBC wires the panel paths at board level: independent LVDS, eDP, MIPI DSI and HDMI outputs on the RK3588, RK3568, RK3399 and T527 tiers, which is what turns a ticket terminal into a counter screen plus a customer screen plus a waiting area screen. AndroidSBC has now closed the 4th consecutive quarterly window on this family, with 170800 boards scheduled for Marseille and France on the Marseille - Shanghai lane as of September 21, 2026.

Competitive Comparison: WF-Q3399 vs Competing Queue Management Kiosk Android Boards

The WF-Q family is specified against the alternatives a Marseille integrator actually shortlists: a single-platform board vendor, a board shipped without peripheral drivers, a board without unattended-operation features, and a board that cannot drive a counter screen and a waiting area screen independently.

• vs single-platform board vendors: the WF-Q family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-Q family arrives with thermal printer, ticket dispenser, barcode scanner, QR code, NFC, RFID, voice module, speaker amplifier, microphone, capacitive and IR touch drivers already integrated, so the {city} integrator writes the queue application rather than the driver layer.
• vs boards without unattended-operation features: the WF-Q family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-Q family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568, RK3399 and T527 tiers, which is the difference between a counter screen plus a customer screen and a mirrored duplicate.

Global Queue Management / Ticketing / Calling Terminal Market Trends

AndroidSBC reads the queue figures as a demand baseline rather than a forecast: dual-screen high definition queue display terminal programmes in France move with site openings and counter refurbishments, and the board decision for Marseille is usually made a full budget cycle before the tender is published.

• Hospital and clinic counters: WF-Q3399 is the usual starting point for outpatient ticketing, with the dual-screen WF-Q1331 as the counter plus waiting area option.
• Bank, tax and social security windows: the mid-tier WF-Q1331 and the calling-capable WF-Q6180 sister SKUs form the counter ladder, with window display and voice broadcast on the same board.
• Outdoor and 24-hour ticketing cabinets: WF-Q6180 and the industrial sister SKUs cover continuous-operation service points across a city estate.

The gap between a market forecast and a Marseille order book is the counter count per site type, and AndroidSBC publishes the per-site assumptions it uses for France so integrators can sanity-check their own numbers.

Partner Success Story: Meridian Patient Flow Systems (hospital queue integrator)

The Meridian Patient Flow Systems case in the EMEA healthcare segment is a working example of how the WF-Q family from AndroidSBC supports Marseille integrators. Meridian Patient Flow Systems rolled out 170800 WF-Q queue boards across 38 hospital outpatient departments, replacing manual ticket rolls with self-service dispensers and calling panels.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Patient Flow Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering ticket dispenser, thermal printer, barcode scanner, QR code, NFC, RFID, voice module, speaker amplifier, microphone, LED number panel and capacitive touch.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Meridian Patient Flow Systems Head of Patient Flow Platforms for EMEA Healthcare noted: Meridian Patient Flow Systems standardised on the WF-Q dual-screen board so the counter screen and the waiting area screen run independent content from one board, with 170800 units released into the Marseille hospital group in the first wave.

Field Report: dual-screen window display rollout at a telecom service centre

PINGHU, Shenzhen, September 21, 2026 - Jian Guo, AndroidSBC field desk. Technicians at the Longgang line re-ran the ticket dispenser and thermal printer handshakes on every WF-Q3399 board in the lot, because those two peripherals are where a France rollout tends to stall. The WF-Q3399 queue management kiosk Android motherboard order for Marseille, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-Q3399 dual-screen high definition queue display terminal production lot includes the WF-Q3399-A variant as the typical configuration, with ticket dispenser and thermal printer driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, PINGHU, Shenzhen. French service halls combine a ticket dispenser at the entrance with high-brightness window displays in the same counter lane.

WF-Q3399 Application Scenarios

The WF-Q3399 dual-screen high definition queue display terminal sits inside a twelve-variant WF-Q queue management kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-Q3399-A configuration is the typical build for the high resolution window display network use case, with identity peripheral driver SDK and staged OTA management bundled.

• Hospital outpatient ticket dispensers: WF-Q3399 plus WF-Q5270 form the entrance ladder, with thermal printing and counter calling on the same board.
• Clinic and consultation room calling panels: WF-Q5270 plus WF-Q8800 are the usual pairing where room calling and waiting area display run together.
• Bank branch counter and window displays: WF-Q8800 is the dedicated dual-screen SKU, running a counter number screen and a customer information screen independently.
• Tax, social security and housing fund windows: WF-Q8801 plus WF-Q3600 cover queuing and window display where the counter number has to follow local formats.
• Pharmacy and laboratory ticketing points: the compact WF-Q3399 and the entry-tier sister SKUs serve walk-in counters where space is limited.
• Outdoor and 24-hour service halls: the industrial T527 sister SKU takes the unattended ticketing cabinets that see a full seasonal temperature range in Marseille.
• Waiting area status and announcement screens: the H618 and A133 sister SKUs drive continuous queue status and information screens across a Marseille building estate.
• Restaurant waiting list and ordering points: WF-Q3600 plus WF-Q5270 pair the ticket printer and the calling panel on one board for the Marseille hospitality estate.
• Legacy queue system refresh programmes: the RK3288 and RK3399 sister SKUs match the mechanical and electrical footprint of existing Marseille counter terminals, so a refresh does not become a redesign.

Partnership Models for Marseille Buyers

For Marseille and France partners the commercial question is how much of the design they want to own, and AndroidSBC answers it with three tracks on one WF-Q platform.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom display and I/O split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

AndroidSBC supports partners moving between tracks mid-programme in Marseille, which is common when a distributor wins a queue tender that turns into a private-label line for France.

Frequently Asked Questions

Does the WF-Q queue management kiosk Android motherboard family support a dual-screen high definition queue display terminal?

Answer: Yes, and it is qualified on the same production line as the rest of the family. The dual-screen high definition queue display terminal runs on the WF-Q baseline image that France buyers receive, so there is no separate integration project.

What is the real difference between the RK3399 tier and the other silicon tiers in the WF-Q family?

Answer: In practice the RK3399 sets three things: how many panels the board can drive independently, whether on-device inference is available for recognition, and how much thermal headroom the enclosure needs. Everything else in the WF-Q family is common across tiers for Marseille and France.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for France?

Answer: Yes. The export desk prepares CE marking with ANFR radio interface registration documentation alongside the ANFR conformity file, and both are versioned against the board revision that ships to Marseille and France.

What are the MOQ and lead time for a first order of the WF-Q queue management kiosk Android motherboard family?

Answer: For France programmes the entry points are one board as a sample, 100 boards for OEM branding and 500 boards for an ODM design. Mass production lead to Marseille is 15-30 days from BOM sign-off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-Q family?

Answer: Yes. AndroidSBC writes and maintains custom firmware for France queue deployments, from kiosk-mode lockdown and pre-installed clients through to a full AOSP build or a Linux BSP port.

How are software updates and long-term support handled on the WF-Q family?

Answer: AndroidSBC commits to a seven-year firmware update window on the WF-Q family, delivered as staged OTA with rollback. France estates can hold a revision while the Marseille integrator validates it.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-Q family?

Answer: Yes. AndroidSBC supports FBA and 3PL consolidation delivery for the WF-Q family, with the Port of Marseille routing and the export documentation handled by the export desk.

How are RMA and DOA replacements handled on the WF-Q queue management kiosk Android motherboard family?

Answer: DOA boards are replaced on the next shipment and RMA units are repaired or replaced against the board revision record, which AndroidSBC keeps versioned for every Marseille and France lot.

Contact AndroidSBC: Start Your WF-Q3399 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-Q queue management kiosk Android motherboard family. Marseille integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Marseille and France the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.