POS Board for Korea, WF-P3288, AndroidSBC, Marseille

TL;DR: POS Board for Korea

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-P POS board family serving Marseille, France. The WF-P3288 POS Android motherboard spans the legacy POS refresh with dual-screen output and eleven sister models in the WF-P series, all built on the RK3288 quad-core ARM Cortex-A17 1.8GHz SoC with the ARM Mali-T764 GPU, dual LVDS output at 1080p, and Android 10 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-P family from the Longgang source factory in Shenzhen to Marseille and France importers who run supermarket checkout lanes, convenience counters, restaurant tills, hotel front desks, fuel forecourt cabinets and unattended payment kiosks.

About AndroidSBC and the POS Android Motherboard Family

Wanlin Manufacturing Group runs the Longgang production site where the WF-P POS motherboard family is assembled, burned in and packed. AndroidSBC handles the export side, and the two sit in the same building, which is why France importers get a fixed bill of materials per lot rather than a board that silently changes silicon between shipments. Each production lot is burned in for 72 hours with the display, the touch panel and the printer loop running, and the serial number is logged against the test record so a Marseille partner can trace a single board back to its run.

WF-P3288 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-P3288 (legacy POS refresh with dual-screen output) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For France importers sourcing the WF-P family, the WF-P3288-A variant is the typical configuration for the installed base refresh programme use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing POS Android Motherboards for France Buyers

The seventh obstacle is lead time volatility. A Marseille chain planning a store opening cannot absorb a board that moves from a 15-day to a 60-day lead because a memory allocation disappeared.

Dual-screen is a hardware capability on the WF-P family, not a marketing line. The RK3576 and RK3568 tiers carry independent framebuffers on two lanes, so the cashier screen runs the transaction while the customer display runs its own content at its own resolution. The 4th container of WF-P boards for Marseille left the Longgang dock on September 23, 2026 carrying 183100 units, routed through the Marseille - Shanghai lane with the compliance file and the peripheral driver set already packed.

Competitive Comparison: WF-P3288 vs Competing POS Android Boards

What follows is not a spec-sheet comparison. It is the four questions a Marseille chain asks after its first failed rollout.

• Platform breadth: twelve models on eight chips (RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618, T527), so {city} integrators can move between tiers without changing the driver stack or the mounting pattern.
• Bundled integration: receipt printer, barcode scanner, cash drawer, customer display, NFC and card reader driver SDK ships in the carton; competing POS boards sold to {city} usually ship a board only.
• Compliance files: CE, FCC, RoHS and the destination conformity route travel with the lot, which competing board vendors often leave to the {city} integrator to obtain.
• Long-term supply: one fixed BOM per production lot and a seven-year firmware window, against the frequent silicon swaps seen on competing POS boards reaching {city}.

Global POS Terminal and Smart Checkout Market Trends

Unattended and self-service formats are the segment where the board specification bites hardest. A cabinet on a forecourt or in a store entrance has no staff to reset it, so the legacy POS refresh with dual-screen output has to hold a watchdog, an RTC and a clean auto-recovery path.

• Entry counter tier: WF-P3288 covers single-screen checkout and small format stores, where the brief is a reliable 1080p panel, a receipt printer and a cash drawer on one board.
• Dual-screen mainstream tier: WF-P1330 drives the cashier screen and the customer display independently, which is the configuration most restaurant and supermarket rollouts standardise on.
• AI and unattended tier: WF-P6180 carries the NPU, the wide temperature window and the watchdog behaviour that face payment counters and outdoor cabinets require.

For Marseille partners the commercial conclusion is that the board vendor has to be a factory. A trading company cannot hold a BOM across a three-year refresh.

Partner Success Story: Meridian Retail Systems (supermarket checkout lane integrator)

The Meridian Retail Systems case in the EMEA grocery retail segment is a working example of how the WF-P family from AndroidSBC supports Marseille integrators. Meridian Retail Systems rolled out 183100 WF-P dual-screen boards across 68 supermarket checkout lanes.

• OEM relationship: AndroidSBC private-label SKU shipped with Meridian Retail Systems branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3576 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering thermal printer, receipt printer, barcode scanner, QR scanner, cash drawer, customer display, NFC reader, RFID reader, magnetic stripe reader, IC card reader, PIN pad, fingerprint reader and face recognition camera.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Meridian Retail Systems Head of Store Platforms for EMEA Grocery Retail noted: Meridian Retail Systems standardised on the WF-P dual-screen board so the cashier screen and the customer display run from one board, with 183100 units released into the Marseille grocery group in the first wave.

Field Report: installed base refresh across a discount chain

PINGHU, September 23, 2026 - Cong Yu, AndroidSBC field desk. On the bench at Longgang the WF-P3288 drove the cashier panel, the customer display and the receipt printer simultaneously for the full burn-in window before the France lot was released. The WF-P3288 POS Android motherboard order for Marseille, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-P3288 legacy POS refresh with dual-screen output production lot includes the WF-P3288-A variant as the typical configuration, with receipt printer, barcode scanner and cash drawer driver SDK plus staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Cong Yu, AndroidSBC field desk, PINGHU. French chains ask for the NF525 fiscal certification trail and French receipt wording, and they audit the log retention behaviour during the pilot.

WF-P3288 Application Scenarios

The WF-P3288 legacy POS refresh with dual-screen output sits inside a twelve-variant WF-P POS Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-P3288-A configuration is the typical build for the installed base refresh programme use case, with receipt printer, scanner and cash drawer driver SDK plus staged OTA management bundled.

• Supermarket and hypermarket checkout: the WF-P3288 drives the cashier screen while the second lane carries the customer display or the promotion wall in Marseille.
• Convenience and small format stores: the WF-P5270 fits a narrow counter with a receipt printer, a barcode scanner and a cash drawer on one board.
• Restaurants and quick service: the WF-P7600 runs the order screen plus a kitchen display output, with the customer display showing the order total.
• Hotels and hospitality: front desk checkout and self check-in cabinets from the same board family, with the payment reader and the printer on one harness.
• Unattended retail and vending: the WF-P7601 holds a 7x24 duty cycle in a cabinet with no staff to reset it.
• Fuel forecourts and parking: the WF-P7602 runs the outdoor payment cabinet, where the wide temperature window and the watchdog matter more than raw CPU.
• Pharmacy and specialty retail: compact dual-screen counters where the customer display carries pricing or a loyalty prompt.
• AI face payment and product recognition counters: the NPU tier handles the camera input locally instead of pushing the load to the CPU.
• Retrofit programmes in Marseille: the same board re-uses the existing enclosure, panel and counter harness, so an installed estate can be upgraded lane by lane.

Partnership Models for Marseille Buyers

For Marseille and France buyers the question is rarely which board, it is which relationship. Three tracks cover the answers.

• Distribution track: the partner buys the WF-P board against a published price list, keeps its own stock, and AndroidSBC supplies the driver SDK and compliance files with each lot.
• Integration track: the partner takes the board plus firmware customisation, enclosure drawings and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-P board ships under the partner brand with customised boot logo, packaging and documentation, on a fixed BOM held for the length of the agreement.

Entry to any of the three tracks starts with a sample batch and a peripheral validation run, and France partners usually convert within one quarter.

Frequently Asked Questions

Does the WF-P POS Android motherboard family support a legacy POS refresh with dual-screen output?

Answer: It is. The WF-P family was specified around legacy POS refresh with dual-screen output, and every board in the family is validated on that use case before it leaves the Longgang factory.

Which silicon tiers are available in the WF-P family for France buyers?

Answer: The WF-P family spans RK3576, RK3568, RK3566, RK3288, RK3399, A133, H618 and T527. For France buyers the choice is driven by counter throughput and by whether the lane needs an NPU.

Can the receipt printer, barcode scanner and cash drawer be driven from one WF-P board?

Answer: Yes - that is the standard counter configuration. The printer runs on RS232 or USB, the scanner on USB, and the drawer fires from the RJ11 header, all validated together before the lot ships.

What is the minimum order quantity and the sample lead time for France?

Answer: AndroidSBC takes single-board sample orders with a 1-3 day lead, then a 15-30 day mass-production lead on bulk orders. The MOQ for private-label work is agreed per SKU.

Is custom ROM, boot logo or pre-installed app development available?

Answer: AndroidSBC supports custom Android AOSP builds, Linux BSP porting, boot logo and animation work, pre-installed apps and custom UI, and locks the result as the production image.

How are firmware updates delivered to a France estate after deployment?

Answer: AndroidSBC ships staged OTA with rollback as a bundled tool, so a France estate of several hundred lanes can be updated in waves rather than all at once.

What shipping terms does AndroidSBC support for France orders?

Answer: FOB Shenzhen, CIF and EXW are quoted on the same price list. Export customs clearance and global shipping are handled from Longgang, and the Marseille partner receives tracking with the lot.

What happens if a board fails in the field in France?

Answer: Each board carries a serial number logged against its burn-in record, so a field failure in France is traced to its production lot, and the replacement ships from the same frozen BOM.

Contact AndroidSBC: Start Your WF-P3288 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-P POS board family. Marseille integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Marseille and France the sample lead is 1-3 days and the mass-production lead is 15-30 days. AndroidSBC, a Wanlin Manufacturing Group export brand, commits to a seven-year firmware update window.