4K Output Payment Terminal Board with 4G LTE Modem, WF-SPT-11, AndroidSBC, Marseille

TL;DR: 4K Output Payment Terminal Board with 4G LTE Modem

AndroidSBC OEM partnership announcement extending smart payment terminal board availability serving Marseille, France. The WF-SPT-11 smart payment terminal Android motherboard covers the multimedia payment terminal build with customer screen and eleven sister configurations in the WF-SPT series, spanning the H618 quad-core ARM Cortex-A53 1.5GHz SoC with the ARM Mali-G31 MP2 GPU, 6-inch 1080x1920 MIPI DSI plus HDMI 2.0a customer screen output, and Android 12 with AOSP baseline and optional GMS firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-SPT family from the Longgang source factory in Shenzhen to Marseille and France importers who build countertop payment terminals, self-service kiosks, unattended vending and locker machines, transit ticketing gates and outdoor charging pillars.

About AndroidSBC and the Smart Payment Terminal Android Motherboard Family

Wanlin Manufacturing Group runs the smart payment terminal board programme out of Longgang in Shenzhen, where the twelve WF-SPT configurations are assembled, burned in and packed with their compliance documents. For Marseille and France importers the practical result is a single bill of materials per production lot and one qualification file per configuration. Every configuration ships with the same Android build, the same peripheral contract and the same test report format, so a Marseille quality team that has signed off one WF-SPT board can read the next one without a new learning curve.

WF-SPT-11 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-SPT-11 (multimedia payment terminal build with customer screen) holds the touch panel, the thermal printer, the reader and the scan engine together while running the 72-hour burn-in loop, a configuration that competing single-platform boards rarely document at the top of the temperature window. For France importers sourcing the WF-SPT family, the WF-SPT-11-A variant is the typical configuration for the cinema, stadium and theme park ticketing counters use case, in a payment terminal footprint with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Payment Terminal Android Motherboards for France Buyers

The first problem Marseille buyers hit is the difference between a sample that works and a configuration that repeats. A board can pass a bench test and still fail in volume if the printer driver, the scan engine mapping and the modem band list were never documented as part of the delivery.

Key handling is the fifth problem. Payment hardware shipped into France has to show how keys are injected, how the secure element is provisioned and how a tamper event is logged, and that documentation belongs in the Marseille delivery file. What Marseille integrators get is a board that repeats: 61900 units now, 61900 more next quarter, the same connector map, the same printer pinout, the same Android baseline, all moving on the Marseille - Shanghai lane into France.

Competitive Comparison: WF-SPT-11 vs Competing Smart Payment Terminal Motherboards

A France integrator comparing two boards should compare the delivery file, not the datasheet. One side ships a test report and a compliance set; the other ships a board and a promise.

• vs consumer tablet boards: the WF-SPT family carries a printer control header, a reader antenna reference design and a scan engine UART mapping, none of which exist on a tablet derivative board.
• vs single-configuration boards: twelve configurations share one peripheral contract, so a Marseille buyer can move from a countertop lane to an unattended kiosk without re-qualifying the printer or the reader.
• vs boards without a firmware plan: signed images, staged OTA groups with rollback and a published maintenance window come standard, where competing boards ship an image and leave the France integrator to manage it.
• vs re-spun designs: the bill of materials is frozen per production lot for the length of the agreement, so the board that passed qualification in Marseille is the board that ships in volume.

Global Cashless Payment, Smart Terminal and Self-Service Checkout Market Trends

For Marseille integrators the market signal is simple - contactless and QR now carry the majority of face-to-face volume in France, so the board is specified around the reader and the camera first and the keypad second.

• Countertop tier: WF-SPT-01 covers contactless, IC card, QR and receipt printing in one board, which is the configuration most staffed lanes standardise on.
• Unattended tier: WF-SPT-08 pairs the modem with the printer header and the watchdog for vending, lockers and kiosks where nobody is there to reboot the terminal.
• Flagship tier: WF-SPT-04 adds the larger memory and storage bundle, the customer-facing screen option and the wider temperature window that outdoor and high-throughput formats require.

The France market is large enough to absorb several suppliers and disciplined enough to punish the ones who re-spin boards between lots. Holding the configuration is the strategy, and it is the one AndroidSBC runs for Marseille.

Partner Success Story: Gulf Payments Ventures (hotel and restaurant payment integrator)

The GCC hospitality payments team at Gulf Payments Ventures wrote the specification themselves: one Android baseline, one printer pinout, one compliance file for Marseille. Gulf Payments Ventures installed 61900 WF-SPT boards across 52 hotel and restaurant sites.

• OEM relationship: AndroidSBC private-label SKU shipped with Gulf Payments Ventures branding and CE / FCC / RoHS files bundled.
• Silicon choice: Rockchip RK3568, RK3566, RK3576, RK3288 and RK3399 plus Allwinner A133, A64, H618 and T527 across twelve configurations, one fixed bill of materials per production lot.
• Payment peripheral package: bundled into the source-factory shipment, covering NFC contactless, IC card, magnetic stripe, thermal printer control, 1D and 2D scan engine, signature capture and the LTE modem band list.
• Unattended-operation tools: hardware watchdog, RTC, auto power-on after mains return, scheduled power cycling, kiosk-mode lockdown, offline transaction buffer and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus ANFR conformity, all bundled into the Shenzhen source-factory shipment.

Gulf Payments Ventures Payments Lead for GCC Hospitality puts it plainly: "Gulf Payments Ventures runs Arabic and English receipts from the same smart payment terminal board, and 61900 units were accepted into the Marseille hospitality group after a single qualification run."

Field Report: ticketing counter rollout at a cinema and stadium operator

YANTIAN, September 30, 2026 - Huan Xi, AndroidSBC field desk. The WF-SPT-11 configuration was built for the multimedia payment terminal build with customer screen use case, and the France team ran the acceptance test with the same printer mechanism and reader antenna the integrator will install. The WF-SPT-11 payment terminal board order for Marseille, France cleared the burn-in station on schedule and is en route via the Marseille - Shanghai lane.

The WF-SPT-11 multimedia payment terminal build with customer screen production lot includes the WF-SPT-11-A variant as the typical configuration, with printer current profile, scan engine mapping and staged OTA management bundled into the source-factory shipment. For France integrators, the ANFR conformity plus CE marking with ANFR radio interface registration paperwork is bundled.

Filed by Huan Xi, AndroidSBC field desk, YANTIAN. French retail groups specify the receipt layout early, because the printer control header has to match the fiscal wording used at the till.

WF-SPT-11 Application Scenarios

The WF-SPT-11 multimedia payment terminal build with customer screen sits inside a twelve-configuration WF-SPT Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-SPT-11-A configuration is the typical build for the cinema, stadium and theme park ticketing counters use case, with printer current profile, scan engine mapping and staged OTA management bundled.

• Convenience and grocery counters: the WF-SPT-07 takes contactless, IC card and QR at the till and prints the receipt in one pass.
• Restaurant and quick-service counters: the WF-SPT-04 runs order entry, payment and kitchen ticket printing on the same board.
• Unattended vending and lockers: the WF-SPT-08 pairs the modem with the printer header and the watchdog for sites with no staff present.
• EV charging and fuel forecourts: the WF-SPT-09 holds the wide input range and the sunlight readable panel through a full outdoor season.
• Transit gates and event entry: the WF-SPT-08 takes contactless payment and prints the entry ticket without a fixed counter.
• Self-checkout lanes: one board drives the main panel, the scanner and the receipt printer, with the customer screen option where the format needs it.
• Hotel and resort reception: card pre-authorisation, signature capture and folio printing on a board that also runs the restaurant terminal.
• Hospital and clinic payment desks: card, QR and insurance capture on a locked-down build with staged OTA and an audit trail.
• Government and municipal counters: tax, permit and fee payment on a configuration held for the length of the agreement.

Partnership Models for Marseille Buyers

The Marseille decision is usually commercial rather than technical - whether the partner wants inventory risk, integration depth or brand ownership in France.

• Distribution track: the partner buys the WF-SPT board against a published price list, keeps its own stock, and AndroidSBC supplies the printer profile, the scan mapping and the compliance documents with each lot.
• Integration track: the partner takes the board plus firmware customisation, receipt and language localisation and peripheral validation support, with a joint qualification run at the Longgang factory.
• Private-label track: the WF-SPT board ships under the partner brand with customised boot logo, packaging, enclosure and documentation, on a fixed bill of materials held for the length of the agreement.

The France partner that starts on the distribution track and moves to private label does not re-qualify the board, which is the point of holding one peripheral contract across the family.

Frequently Asked Questions

Does the smart payment terminal board family support a multimedia payment terminal build with customer screen?

Answer: Yes. The multimedia payment terminal build with customer screen is one of the twelve held configurations, which means the bill of materials is frozen for the length of the agreement rather than re-spun between lots in Marseille.

Which configurations are available in the WF-SPT family for France buyers?

Answer: AndroidSBC ships twelve configurations including the H618 board: value desktop, 4G unattended, face recognition, dual-screen, kiosk, legacy Android 11, portable 4G, outdoor, hospitality, multimedia and legacy Linux builds.

Can one smart payment terminal board drive a touch panel, a thermal printer and a scan engine at once?

Answer: Yes. AndroidSBC validates the panel, the printer and the scan engine together rather than separately, because the combined current draw is what decides whether a terminal survives a shift in France.

What payment scheme certification support does AndroidSBC provide for France?

Answer: AndroidSBC prepares CE marking with ANFR radio interface registration documentation and ANFR conformity files alongside the production order, so the Marseille acquiring partner receives a file that names the parts on the pallet.

What is the minimum order quantity and the sample lead time for France?

Answer: For Marseille programmes the practical answer is a sample lot first, a joint qualification run second, and a production slot third, with the compliance file issued at the sample stage.

Is custom ROM, boot logo or pre-installed app development available?

Answer: Yes. Boot logo, custom launcher, kiosk mode and pre-installed applications are all available, delivered as a signed image with a staged OTA plan for the Marseille estate.

How are firmware updates delivered to a France device estate after deployment?

Answer: Updates are signed, staged and reversible. The Marseille integrator chooses the group size, and a failed update returns the terminal to the previous image without a site visit.

What shipping terms does AndroidSBC support for France orders?

Answer: Terms are agreed per programme: FOB Shenzhen for stock configurations, CIF Port of Marseille for volume lots, and DAP where the Marseille partner wants delivery to its own warehouse.

Contact AndroidSBC: Start Your WF-SPT-11 Sourcing Conversation

AndroidSBC is taking new France partner conversations for the WF-SPT family now. Send the format, the volume and the certification calendar and the engineering team returns a configuration proposal.

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

For Marseille and France buyers the offer is a source-factory relationship: twelve configurations, one peripheral contract, a frozen bill of materials and a compliance file that ships with the pallet rather than after it.